1/4″ Hardened Steel Spray Tip – 65/30

1/4” Hardened Steel Spray Tip – 65/30 These tips are made to last much longer than regular steel tips. They perform great, even with sand in the mixture. Heat treated hardened tips give you longer tip life & less down time! All treated nozzles are case hardened to a .020 min. case depth with a 60 HRC minimum surface hardness.

The purpose of the tip is for cutting in against asphalt and the grass, to get a very sharp edge and very little on the grass. This will give a nice edge. It should be used at approximately 70 psi.